Home Distributors/Dealers Case Drawing Products Specials Brochure Order Support Contact Us Join Mail List


CruzPro OP60
Digital Oil Pressure Gauge and Alarm

Download User's Manual PDF

Square OP60s OP60 Digital Oil Pressure Gauge and Alarm

Round OP60r OP60 Digital Oil Pressure Gauge and Alarm

CE Certified for Europe

CE Certified

Waterproof front case

Specifications

Operating Voltage:
9.5 - 33.0 VDC

Current Drain:
0.018 amps nominal

Display:
4 digit LCD, 5 levels of backlighting

Data:
Oil Pressure, 0 to 75, 0 to 80, 0 to 150, 0 to 350 and 0 -400 PSI or equivalent Bars

Inputs:
Built-in calibration curves for all popular senders from Teleflex, VDO, GM, Stewart-Warner, Faria, etc.

Data Output:
NMEA 0183 serial 4800 BAUD

Alarms:
Built-in 85 dB audible alarm. Settable high and low oil pressure alarms.
The NMEA 0183 serial output pin can be user programmed as an external alarm output terminal.

Size:
2.5" dia X 4.1" deep (61mm x 104mm)

Mounting:
2-1/8" (55mm) round hole


OP60

The OP60 Oil Pressure Gauge displays engine oil pressure in Psi or Bars. It has built-in calibration curves for most popular pressure senders manufactured by VDO, Teleflex, Faria, Stewart-Warner, GM and others (sender not provided). The sender type is easily selected with the front panel keys. Low and High pressure alarms can be set over the entire range of the instrument/sender. When activated, the OP60 built-in 85 dB alarm will sound and the display will flash. The alarms can be enabled or disabled with a single key press. Five levels of backlighting can be selected and all set-up, calibrations constants, alarm values, and sender type is saved to non-volatile memory. Data is output on an NMEA 0183 compatible serial data output.

All constants and calibrations are pre-set during manufacture but you may alter these settings to suit your particular needs. Calibrations can be altered over a wide range using the front-panel switches. All information is automatically saved to non-volatile memory.

With a press of the button you can display oil pressure (in PSI or Bars), High and Low oil pressure alarm set-points.

The OP60 draws only 0.017 amps and 5 levels of backlight (including OFF) can be selected from the front panel.

The OP60 outputs oil pressure on the standard NMEA 0183 serial data line at 4800 BAUD. This ASCII information can be used to log performance or repeat the display information at a remote location on the CruzPro RP60, RP110 and MaxRp110 data repeaters (see www.cruzpro.com/rp60.html, www.cruzpro.com/rp110.html and www.cruzpro.com/maxrp110.html). If NMEA 0183 serial data is not required, then the output terminal can be programmed as an external alarm output pin.



OP60 Connection Diagram


OP60 Connection Diagram





Connecting the CruzPro ER-1 External Relay module to the NMEA 0183/External Alarm Output

Click here to go to ER-1 page
ER-1 External Relay Connection Diagram

Home Distributors/Dealers Case Drawing Products Specials Brochure Order Support Contact Us Join Mail List